Pricing listed below is intended as a general reference or “baseline estimate” for each particular service. Each individual job will be estimated when you drop off your items for service. Prices are Non-Negotiable. We do not take any sort of trade for service.
Trigger Tune Up
Labor rate only. Part(s), finishing, and any test ammunition required are not included.
| Service Description | Price (*Starting at) |
|---|---|
| Glock-Smooth Trigger action only(Does not change trigger pull weight) | $60 |
| Glock- Install new connector (Not including part cost) | $40 |
| Glock- Install connector w/ over-travel stop (parts not included in cost) | $50 |
| Springfield XD- Smooth action only (Does not change take up, release over-travel) | $75 |
| Springfield XD- Install Trigger kit, duty or carry use (parts not included) | $75 |
| Springfield XD- Install Trigger kit, Competition Only (parts not included) | $125 |
| S&W M&P- Install Trigger kit (parts not included) | $75 |
| Install Trigger kit(Glock, Springfield, 1911, S&W, parts not included) | $40 |
| 1911, Sig Sauer, or Browning HP Action/Reliability Job | $125 |
| HK- Install Trigger Spring kit (parts not included) | $75 |
| HK- Install LEM Trigger (parts not included) | $75 |
Sight Installation
Labor rate only. Part(s), finishing, and any test ammunition required are not included.
ALL Prices reflect standard sight work, additional costs may be incurred for “problem sights”
| Service Description | Price (*Starting at) |
|---|---|
| Mill Glock for RMR | $150 |
| Install Factory Sights (Purchased Here) | $50 |
| Install Factory Sights (NOT Purchased Here) | $50 |
| Install STAKE ON Front Sight (Non- Tritium) | $70 |
| Additional Cost to mill out sight (IF NEEDED) | SHOP TIME |
| Machine Slide for Front Dovetail Fit | $70 |
| Machine Slide for NOVAK or Heinnie Rear | $125 |
| Machine Slide for BO-MAR Rear Sight | $160 |
| Install Pinned Revolver Front Sight | $50 |
| Install Revolver Adjustable Rear Sight Blade (Part Included) | $50 |
| Drill/Tap Sight Base Hole (Per Hole) | $40 |
| Pin/Weld Front Sight | $150 |
Pistol Safeties
Labor rate only. Part(s), finishing, and any test ammunition required are not included.
| Service Description | Price (*Starting at) |
|---|---|
| Install Gunsmith Fit Beavertail Grip, Specify Ed Brown or Wilson Type, safety & frame fitting required (refinish included) | $125 |
| Install Drop-In Beavertail Grip Safety | $50 |
| Install Standard 1911 Thumb Safety | $50 |
| Install 1911 Ambi-Thumb Safety (No modifications required) | $70 |
| Install 1911 Ambi-Thumb Safety (If modification is required) | $90 |
| Install Browning Extended Ambi-Thumb Safety | $65 |
Hammer & Triggers
Labor rate only. Part(s), finishing, and any test ammunition required are not included.
| Service Description | Price (*Starting at) |
|---|---|
| Install 1911 Style Match Trigger (Action Job Not Included) | $50 |
| Hammer “Bob” Service (Remove Hammer Spur, Semi-Autos) | $50 |
| Install Match Sear (Action Job Not Included) | $50 |
| Install Hammer (Drop-In, Action Job Not Included) | $50 |
Barells, Bushings, & Guide Rods
Labor rate only. Part(s) and/or finishing are not included.
| Service Description | Price (*Starting at) |
|---|---|
| Thread Barrel for Suppressor * (Surcharge for Metric, L. Hand, & Non-Standard TPI) *Thread Protector Not Included with Barrel Threading | $150+ |
| Ruger .22 BBL Package (Cut/Thread, Relocate Front Sight, Bull BBL Only) | $200+ |
| Cut Barrel, Face, Cut Crown (Sight Install Not Included) | $100 |
| RE-Crown Barrel | $50 |
| Throat Barrel & Polish Feed Ramp | $75 |
| Install & Chamber Match Grade BBL & Matching Bushing 1911 | $150 |
| Install & Chamber Match Grade BBL (1911 Bull BBL, Glock, Browning) | $100 |
| Install Drop-In Barrel (some fit req’d, bushing fit not included) | $50 |
| Install Solid Match Barrel Bushing | $75 |
Pistol Slides
Labor rate only. Part(s) and/or finishing are not included.
| Service Description | Price (*Starting at) |
|---|---|
| Add Front Serrations (Match Rear Serrations) | $150 |
| Lower/Flair Ejection Port (Re-Finish Not Included) | $70 |
| Tune Extractor (Re-Finish Not Included) | $40+ |
| Polish Breech Face (Re-Finish Not Included) | $40 |
| Fit New Slide to Frame (Barrel Fitting Not Included) | $80 |
Pistol Frames
Labor rate only. Part(s) and/or finishing are not included.
| Service Description | Price (*Starting at) |
|---|---|
| Bevel Mag Well | $75 |
| Install/Blend Smith-Alexander 1911 Mag Well (Re-Finish Not Included) | $100 |
| Install Ejector | $50 |
| Install Mag Catch | $30 |
| Install Slide Stop (with added detent) | $50 |
| Stake Plunger Tube | $60 |
| Stake Grip Bushings (Per Hole) | $30 |
| Drill/Tap Frame For Grip Bushings (Per Hole)(Plus Set-Up Fee) | $40 |
| Install Grip Bushings (Standard, Slim, Oversize, EACH) | $30 |
| Install Mainspring Housing (If Fitting Req’d) | $50 |
Revolver Work
Labor rate only. Part(s) and/or finishing are not included.
| Service Description | Price (*Starting at) |
|---|---|
| Action Job (Smooth action, tune internal parts, Single or Double Action, Spring Kit Included ) | $150 |
| Polish Chambers (For Improved Extraction) | $50 |
| Re-crown Barrel | $50 |
| Re-Cut Forcing Cone | $50 |
| Bob Hammer & Polish (D/A Only Conversion) | $100 |
| Round, Radius, & Polish Trigger Face | $80 |
| Correct Timing (S&W Only) | $130 |
| Remove End Shake (Cylinder Play) | $90 |
| Replace S&W Rear Sight Blade (Part Not Included) | $40 |
| Set Barrel Back 1 Turn, Adjust BBL/Cylinder Gap, Re-Cut Forcing Cone | $200 |
| Re-Time Colt D/As(Starting At) | $200 |