-LRK SERVICES-

-LRK SERVICES-

These are the services we offer here at LRK Mechanical. Pricing is in a “Starting At” Structure. In other words, all prices you see on our list are the Base Price of that particular service. All prices in the list are Non-Negotiable and we do not take any sort of trade for service. We do, however, offer a discount on LABOR for LEO and MILITARY customer. Please see our “LEO & GOVT.” page for further details.

GENERAL INFO

GENERAL INFO

  • Shop Rate: $100 per Hour (For all Custom Gunsmithing and services not listed)
  • Minimun Charge Per Firearm: $50 (No exceptions)

 

TYPICAL COMPLETION TIMES

(Prone to Change Depending on Current Work Load)

  • Professional Cleaning Services: 5-10 Business Days
  • Warranty Returns: 4-10 Weeks
  • Sight Installation: 2-5 Business Days
  • General Repairs: 4-6 Weeks (Parts Dependant)

 

CONDITIONS & EXCLUSIONS

  • We reserve the right to refuse any job at any time for any reason
  • We reserve the right to refuse any work we decide would render a firearm unsafe
  • All Class lll Firearms ABSOLUTELY MUST have a copy of the proper paperwork included with it
  • We DO NOT work on or clean any AIR Pistols or Rifles, Paintball Guns, or any replicas
  • If there is a need for specialized work, we reserve the right to ship the firearm to another manufacturer for work (This may incur additional shipping and handling charges)
  • If warranty work is required, we reserve the right to ship to the manufacturer (Which may incur additional shipping & handling charges)
  • If there is a need for test firing, we ALWAYS use factory-loaded ammo. We DO NOT use handloads or Mil-Surp ammo
  • WE DO NOT REMOVE OR DEACTIVATE SAFETIES FOR ANYONE, EVER

GENERAL GUNSMITHING SERVICES
(Starting At)

GENERAL GUNSMITHING SERVICES
(Starting At)

SERVICES

(Starting At) (Part/Finishing/Ammo Not included)

MINUMUM Machine work fee
Assemble your AR Upper (parts not included in cost)
Assemble your AR Lower (parts not included in cost)
Safety Inspection/Function check (no test fire)
Safety Inspection/Function check Class III or .50Cal (no test fire)
Safety Inspection/Function check w/Test Fire (Class III & .50 cal’s excluded)
Professional Cleaning: Strip, clean, inspect, oil, reassemble
Professional Cleaning: Rusted HEAVILY (Minimum $150 Cost)
Professional Cleaning: Class III, .50Cals, ARs with Multiple Accessories, rusted guns, dbl-barrel’s
Test Fire- Function, No sight in
Test Fire- Function, Machine Gun
Test Fire- Function & 25 yd Sight in
Non-Firing BORE Sighting (Collimator ONLY)
Remove Stuck Bullet or Case
Broken Screw Removal/per
Re-Assemble Gun from Parts (If Complete)

Warranty Return to Manufacturer (Not including S&H)
Full AK Build (YOUR PARTS, Includes Disassem/Reassem, No Cerakote or finish included)
Full AK Cerakote Finish (Solid Color) *Pro-rated to $200 if done at time of Build
Pistol Build- “Full Boat LRK” (Machine Work to bring Parts to our standads)

$50
$50
$70
$40
$70

$50
$50
SHOP RATE

$100
$40
$60
$50
$40
$40
$40
Minimum/Starting At:$75
$50

$400

$350

$5K-6K+

MINUMUM Machine work fee: $50

Assemble your AR Upper (parts not included in cost): $50

Assemble your AR Lower (parts not included in cost): $70

Safety Inspection/Function check (no test fire): $40

Safety Inspection/Function check Class III or .50Cal (no test fire): $70

Safety Inspection/Function check w/Test Fire (Class III & .50 cal’s excluded): $50

Professional Cleaning: Strip, clean, inspect, oil, reassemble: $50

Professional Cleaning: Rusted HEAVILY (Minimum $150 Cost): SHOP RATE

Professional Cleaning: Class III, .50Cals, ARs with Multiple Accessories, rusted guns, dbl-barrel’s: $100

Test Fire- Function, No sight in: $40

Test Fire- Function, Machine Gun: $60

Test Fire- Function & 25 yd Sight in: $50

Non-Firing BORE Sighting (Collimator ONLY): $40

Remove Stuck Bullet or Case: $40

Broken Screw Removal/per: $40

Re-Assemble Gun from Parts (If Complete): Minimum/Starting At $75

Warranty Return to Manufacturer (Not including S&H):$50

Full AK Build (YOUR PARTS, Includes Disassem/Reassem, No Cerakote or finish included): $400

Full AK Cerakote Finish (Solid Color) *Pro-rated to $200 if done at time of Build: $350

Pistol Build- “Full Boat LRK” (Machine Work to bring Parts to our standads): $5K-6K+

HANDGUN SERVICES
(Starting At)

HANDGUN SERVICES (Starting At)

TRIGGER TUNE-UPS

(Starting At) (Part/Finishing/Ammo Not included)

Glock-Smooth Trigger action only(Does not change trigger pull weight)
Glock- Install new connector (Not including part cost)
Glock- Install connector w/ over-travel stop (parts not included in cost)
Springfield XD- Smooth action only (Does not change take up, release over-travel)
Springfield XD- Install Trigger kit, duty or carry use (parts not included)
Springfield XD- Install Trigger kit, Competition Only (parts not included)
S$W M&P- Install Trigger kit (parts not included)
Install Trigger kit(Glock, Springfield, 1911, S&W, parts not included)
1911, Sig Sauer, or Browning HP Action/Reliability Job
HK- Install Trigger Spring kit (parts not included)
HK- Install LEM Trigger (parts not included)

$60
$40
$50
.
$75
$75
$125
$75
$40
$125
$75
$75

Glock-Smooth Trigger action only(Does not change trigger pull weight):$60

Glock- Install new connector (Not including part cost):$40

Glock- Install connector w/ over-travel stop (parts not included in cost):$50

Springfield XD- Smooth action only (Does not change take up, release
over-travel
):$75

Springfield XD- Install Trigger kit, duty or carry use (parts not included):$75

Springfield XD- Install Trigger kit, Competition Only (parts not included):$125

S$W M&P- Install Trigger kit (parts not included):$75

Install Trigger kit(Glock, Springfield, 1911, S&W, parts not included):$40

1911, Sig Sauer, or Browning HP Action/Reliability Job: $125

HK- Install Trigger Spring kit (parts not included): $75

HK- Install LEM Trigger (parts not included): $75

SIGHT INSTALLATION

(Starting At) (Part/Finishing/Ammo Not included)
(ALL Prices reflect standard sight work, additional costs may be incurred for “problem sights”)

Mill Glock for RMR
Install Factory Sights (Purchased Here)
Install Factory Sights (NOT Purchased Here)
Install STAKE ON Front Sight (Non- Tritium)
Additional Cost to mill out sight (IF NEEDED)
Machine Slide for Front Dovetail Fit
Machine Slide for NOVAK or Heinnie Rear
Machine Slide for BO-MAR Rear Sight
Install Pinned Revolver Front Sight
Install Revolver Adjustable Rear Sight Blade (Part Included)
Drill/Tap Sight Base Hole (Per Hole)
Pin/Weld Front Sight

$150
$50
$50
$70
SHOP TIME
$70
$125
$160
$50
$50
$40
$150

Mill Glock for RMR: $150

Install Factory Sights (Purchased Here): $50

Install Factory Sights (NOT Purchased Here):$50

Install STAKE ON Front Sight (Non- Tritium):$70

Additional Cost to mill out sight (IF NEEDED): SHOP TIME

Machine Slide for Front Dovetail Fit: $70

Machine Slide for NOVAK or Heinnie Rear: $125

Machine Slide for BO-MAR Rear Sight: $160

Install Pinned Revolver Front Sight: $50

Install Revolver Adjustable Rear Sight Blade (Part Included): $50

Drill/Tap Sight Base Hole (Per Hole): $40

Pin/Weld Front Sight: $150

PISTOL SAFETIES

(Starting At) (Part/Finishing/Ammo Not included)

Install Gunsmith Fit Beavertail Grip, Specify Ed Brown or Wilson Type, safety & frame fitting req’d (refinish incld)_
Install Drop-In Beavertail Grip Safety
Install Standard 1911 Thumb Safety
Install 1911 Ambi-Thumb Safety (No modifications required)
Install 1911 Ambi-Thumb Safety (If modification is required)
Install Browning Extended Ambi-Thumb Safety

.
$125
$50
$50
$70
$90
$65

Install Gunsmith Fit Beavertail Grip, Specify Ed Brown or Wilson Type, safety & frame fitting req’d (refinish incld)_: $125

Install Drop-In Beavertail Grip Safety: $50

Install Standard 1911 Thumb Safety: $50

Install 1911 Ambi-Thumb Safety (No modifications required): $70

Install 1911 Ambi-Thumb Safety (If modification is required): $90

Install Browning Extended Ambi-Thumb Safety$65

HAMMER & TRIGGERS

(Starting At) (Part/Finishing/Ammo Not included)

Install 1911 Style Match Trigger (Action Job Not Included)
Hammer “Bob” Service (Remove Hammer Spur, Semi-Autos)
Install Match Sear (Action Job Not Included)
Install Hammer (Drop-In, Action Job Not Included)

$50
$50
$50
$50

Install 1911 Style Match Trigger (Action Job Not Included)$50

Hammer “Bob” Service (Remove Hammer Spur, Semi-Autos)$50

Install Match Sear (Action Job Not Included)$50

Install Hammer (Drop-In, Action Job Not Included)$50

BARRELS, BUSHINGS, GUIDE RODS

(Starting At) (Part/Finishing Not included)

Thread Barrel for Suppressor * (Surcharge for Metric, L. Hand, & Non-Standard TPI)
(*Thread Protector Not Included with Barrel Threading)
Ruger .22 BBL Package (Cut/Thread, Relocate Front Sight, Bull BBL Only)
Cut Barrel, Face, Cut Crown (Sight Install Not Included)
RE-Crown Barrel
Throat Barrel & Polish Feed Ramp
Install & Chamber Match Grade BBL & Matching Bushing 1911
Install & Chamber Match Grade BBL (1911 Bull BBL, Glock, Browning)
Install Drop-In Barrel (some fit req’d, bushing fit not included)
Install Solid Match Barrel Bushing

$150+
.
.
$200+
$100
$50
$75
$150
$100
$50
$75

Thread Barrel for Suppressor * (Surcharge for Metric, L. Hand, & Non-Standard TPI): $150+

(*Thread Protector Not Included with Barrel Threading)
Ruger .22 BBL Package (Cut/Thread, Relocate Front Sight, Bull BBL Only): $200+

Cut Barrel, Face, Cut Crown (Sight Install Not Included): $100

RE-Crown Barrel: $50

Throat Barrel & Polish Feed Ramp: $75

Install & Chamber Match Grade BBL & Matching Bushing 1911: $150

Install & Chamber Match Grade BBL (1911 Bull BBL, Glock, Browning): $100

Install Drop-In Barrel (some fit req’d, bushing fit not included): $50

Install Solid Match Barrel Bushing: $75

PISTOL SLIDES

(Starting At) (Part/Finishing Cost Extra)

Add Front Serrations (Match Rear Serrations)
Lower/Flair Ejection Port (Re-Finish Not Included)
Tune Extractor (Re-Finish Not Included)
Polish Breech Face (Re-Finish Not Included)
Fit New Slide to Frame  (Barrel Fitting Not Included)

$150
$70
$40+
$40
$80

Add Front Serrations (Match Rear Serrations): $150

Lower/Flair Ejection Port (Re-Finish Not Included): $70

Tune Extractor (Re-Finish Not Included): $40+

Polish Breech Face (Re-Finish Not Included): $40

Fit New Slide to Frame  (Barrel Fitting Not Included): $80

PISTOL FRAMES

(Starting At) (Part/Finishing Cost Extra)

Bevel Mag Well
Install/Blend Smith-Alexander 1911 Mag Well (Re-Finish Not Included)
Install Ejector
Install Mag Catch
Install Slide Stop (with added detent)
Stake Plunger Tube
Stake Grip Bushings (Per Hole)
Drill/Tap Frame For Grip Bushings (Per Hole)(Plus Set-Up Fee)
Install Grip Bushings (Standard, Slim, Oversize, EACH)
Install Mainspring Housing (If Fitting Req’d)

$75
$100
$50
$30
$50
$60
$30
$40
$30
$50

Bevel Mag Well: $75

Install/Blend Smith-Alexander 1911 Mag Well (Re-Finish Not Included): $100

Install Ejector: $50

Install Mag Catch: $30

Install Slide Stop (with added detent): $50

Stake Plunger Tube: $60

Stake Grip Bushings (Per Hole): $30

Drill/Tap Frame For Grip Bushings (Per Hole)(Plus Set-Up Fee): $40

Install Grip Bushings (Standard, Slim, Oversize, EACH): $30

Install Mainspring Housing (If Fitting Req’d): $50

REVOLVER WORK

(Starting At) (Part/Finishing Cost Extra)

Action Job (Smooth action, tune internal parts, Single or Double Action, Spring Kit Included )
Polish Chambers (For Improved Extraction)
Re-crown Barrel
Re-Cut Forcing Cone
Bob Hammer & Polish (D/A Only Conversion)
Round, Radius, & Polish Trigger Face
Correct Timing (S&W Only)
Remove End Shake (Cylinder Play)
Replace S&W Rear Sight Blade (Part Not Included)
Set Barrel Back 1 Turn, Adjust BBL/Cylinder Gap, Re-Cut Forcing Cone
Re-Time Colt D/As(Starting At)

.
$150
$50
$50
$50
$100
$80
$130
$90
$40
$200
$200

Action Job (Smooth action, tune internal parts, Single or Double Action, Spring Kit Included ): $150

Polish Chambers (For Improved Extraction): $50

Re-crown Barrel: $50

Re-Cut Forcing Cone: $50

Bob Hammer & Polish (D/A Only Conversion): $100

Round, Radius, & Polish Trigger Face: $80

Correct Timing (S&W Only): $130

Remove End Shake (Cylinder Play): $90

Replace S&W Rear Sight Blade (Part Not Included): $40

Set Barrel Back 1 Turn, Adjust BBL/Cylinder Gap, Re-Cut Forcing Cone: $200

Re-Time Colt D/As(Starting At) $200

RIFLE SERVICES
(Starting At)

RIFLE SERVICES
(Starting At)

RIFLE BARRELING WORK

(Starting At) (Part/Finishing Cost Extra)

Cut and Crown Barrel(Must submit Form-4 beforehead, if its an SBR conversion)
Re-Crown Barrel
Thread Barrel for Suppressor (Surcharge for Metric, L. Hand, and Non-Standard TPI’s)
Thread AK Barrel
Thread AK Barrel, Move Front Sight, Thread/Pin Brake (See Above)
Thread Barrel for Muzzle Brake or Suppressor(Standard TPI)
Thread Barrel for Muzzle Brake or Suppressor w/ Custom “Invisible” Thread Protector
Fit New Barrel To AR15 (Including Removal/Refit of HGs and Gas Block)
Fit New Gas Block to AR15 (w/ Taper Pin Mounts)
Permanently Affix Flash Hider (Drill & Pin)
Remove Permanently Affix Flash Hider (Drill & Pin)
Remove/ReInstall Flash Hider or Muzzle Brake
Cut, Crown, Thread, and Pin Muzzle Device at 16 Inch Overall Length

.
$100
$50
.
$150
$150
$300
$150
.
$250
$100
$100
$100
$100
$40
$250

Cut and Crown Barrel(Must submit Form-4 beforehead, if its an SBR conversion): $100

Re-Crown Barrel: $50

Thread Barrel for Suppressor (Surcharge for Metric, L. Hand, and Non-Standard TPI’s): $150

Thread AK Barrel: $150

Thread AK Barrel, Move Front Sight, Thread/Pin Brake (See Above): $300

Thread Barrel for Muzzle Brake or Suppressor(Standard TPI): $150

Thread Barrel for Muzzle Brake or Suppressor w/ Custom “Invisible” Thread Protector: $250

Fit New Barrel To AR15 (Including Removal/Refit of HGs and Gas Block): $100

Fit New Gas Block to AR15 (w/ Taper Pin Mounts): $100

Permanently Affix Flash Hider (Drill & Pin): $100

Remove Permanently Affix Flash Hider (Drill & Pin): $100

Remove/ReInstall Flash Hider or Muzzle Brake: $40

Cut, Crown, Thread, and Pin Muzzle Device at 16 Inch Overall Length: $250

BOLT SERVICES

(Starting At) (Part/Finishing Cost Extra)

Install SAKO or M16 Extractor in Remington 700 Bolt
Install Tac Bolt Knob(Rem700 or Win70, Bolt Knob Not Included)
Check Headspace
Re-Build AR15 Bolt(Gas Rings and Firing Pin Retainer Not Included)
Fit AR15 Gas Key, Seal Stake Screws

$200
$140
$40
$50
$50

Install SAKO or M16 Extractor in Remington 700 Bolt: $200

Install Tac Bolt Knob(Rem700 or Win70, Bolt Knob Not Included): $140

Check Headspace: $40

Re-Build AR15 Bolt(Gas Rings and Firing Pin Retainer Not Included): $50

Fit AR15 Gas Key, Seal Stake Screws: $50

HK SPECIFIC SERVICES

(Starting At) (Part/Finishing Cost Extra)

Install Tri-Lug or Other Suppressor Adapter (Adapter Not Included)
Install Paddle Mag Catch (Parts/Re-Finish Not Included)

$200
$200

Install Tri-Lug or Other Suppressor Adapter (Adapter Not Included): $200

Install Paddle Mag Catch (Parts/Re-Finish Not Included): $200

TRIGGER TUNING

(Starting At) (Part/Finishing Cost Extra)

Trigger Job/Action Job, most rifles
Trigger Tuning Job, FNAR rifle
Install & Adjust Aftermarket Trigger (Trigger not included)

$140
$140
$60

Trigger Job/Action Job, most rifles: $140

Trigger Tuning Job, FNAR rifle: $140

Install & Adjust Aftermarket Trigger (Trigger not included): $60

STOCK FITTING

(Starting At) (Part/Finishing Cost Extra)

Complete Bed With Aluminum Pillars, Free-Float Barrel Channel (Most Fiberglass Stocks)
Complete Bed W/O Aluminum Pillars, Free-Float Barrel Channel (Most Fiberglass Stocks)
Install Recoil Pad (Synthetic Stock ad Recoil Pad Not Included)
Install Recoil Pad (Synthetic Stock ad Recoil Pad Not Included)
Install Sling Swivel Stud (EACH, Parts Not Included)
Install AR Stock or Handguard
Install AR Handguard (If Gas Block Has To be Removed)
Install AR Sling Plate
Free Float HG Install (Starting At)

.
$275
.
$240
$75
$100
$30
$30
$60
$40
$100

Complete Bed With Aluminum Pillars, Free-Float Barrel Channel (Most Fiberglass Stocks): $275

Complete Bed W/O Aluminum Pillars, Free-Float Barrel Channel (Most Fiberglass Stocks): $240

Install Recoil Pad (Synthetic Stock ad Recoil Pad Not Included): $75

Install Recoil Pad (Synthetic Stock ad Recoil Pad Not Included): $100

Install Sling Swivel Stud (EACH, Parts Not Included): $30

Install AR Stock or Handguard: $30

Install AR Handguard (If Gas Block Has To be Removed): $60

Install AR Sling Plate: $40

Free Float HG Install (Starting At): $100

SIGHTS

(Starting At) (Part/Finishing Cost Extra)

Drill & Tap Rec for Sight Bases- 6-48 or 8-40 (4 Holes)
Drill & Tap Hole (Hardened or Plate Steel, Extra Charge)
Mount and Bore Sight Scope, Laser Boresighted (More if base needs machining)
Bore Sight Customer Mounted Optics (Collimator Only)
Install Picatinney Scope Rail (No Drill/Tap Req’d, If Machining is req’d, costs extra)
Fit Taper Pins for AR15 A-Frame F.S. on New Barrel

$40/hole
$40/hole

$40
$40

$35-$150
$150

Drill & Tap Rec for Sight Bases- 6-48 or 8-40 (4 Holes): $40/hole

Drill & Tap Hole (Hardened or Plate Steel, Extra Charge): $40/hole

Mount and Bore Sight Scope, Laser Boresighted (More if base needs machining): $40

Bore Sight Customer Mounted Optics (Collimator Only): $40

Install Picatinney Scope Rail (No Drill/Tap Req’d, If Machining is req’d, costs extra): $35-$150

Fit Taper Pins for AR15 A-Frame F.S. on New Barrel: $150

SHOTGUN SERVICES
(Starting At)

SHOTGUN SERVICES
(Starting At)

BARRELING WORK

(Starting At) (Part/Finishing Cost Extra)

Cut and Crown Barrel (Must have Form-4 if SBS/Class-3 conversion)
Hone/Polish Chamber
Hone/Polish Bore
ReCrown & Thread Barrel For Pumpgun for Rem Choke (Only, 12G Only)(BBL Thickness Dependant)

$100
$40
$40
.
$180

Cut and Crown Barrel (Must have Form-4 if SBS/Class-3 conversion): $100

Hone/Polish Chamber: $40

Hone/Polish Bore: $40

ReCrown & Thread Barrel For Pumpgun for Rem Choke (Only, 12G Only)(BBL Thickness Dependant): $180

SIGHT WORKS

(Starting At) (Part/Finishing Cost Extra)

Install Tac Front Sight, Silver Solder, Plain BBL
Install Tritium Tac Front Night SIght, Epoxy/Pin Plain BBL
Install Ghost Ring Rear Sight, includes Drill/Tap in Rec. (2 Holes)
Drill & Tap Rec for Sight Bases- 6-48 or 8-40 (4 Holes)
Drill & Tap Hole (Hardened or Plate Steel, Extra Charge)
Install Picatinney Scope Rail (**No Drill/Tap Req’d, If Machining is req’d, costs extra)
Install Sight Head, BBL Drill/Tap Included, Part Not Included
Install Sight Head in Existing Hole (Part Not Included)

$130
$80
$80
$120
$40/hole
.
$40**
$50
$50

Install Tac Front Sight, Silver Solder, Plain BBL: $130

Install Tritium Tac Front Night SIght, Epoxy/Pin Plain BBL: $80

Install Ghost Ring Rear Sight, includes Drill/Tap in Rec. (2 Holes): $80

Drill & Tap Rec for Sight Bases- 6-48 or 8-40 (4 Holes): $120

Drill & Tap Hole (Hardened or Plate Steel, Extra Charge): $40/hole

Install Picatinney Scope Rail (**No Drill/Tap Req’d, If Machining is req’d, costs extra): $40**

Install Sight Head, BBL Drill/Tap Included, Part Not Included: $50

Install Sight Head in Existing Hole (Part Not Included): $50

ACTION WORK

(Starting At) (Part/Finishing Cost Extra)

Smooth Action, Rem & Mossberg Only
Trigger Tuning (Smooth Only)
Install Rem 870 Large Safety Button
Convert Safety to Left-Hand Button
Install Rem 870 Ejector (Part Not Included)

$90-$150
$80
$40
$80
$100

Smooth Action, Rem & Mossberg Only: $90-$150

Trigger Tuning (Smooth Only): $80

Install Rem 870 Large Safety Button: $40

Convert Safety to Left-Hand Button: $80

Install Rem 870 Ejector (Part Not Included): $100

STOCK WORK

(Starting At) (Part/Finishing Cost Extra)

Install Pachmayr Decelerator Pad (Synthetic Or Wood, Pad Not Included)
Shorten Length Of Pull, Cut Stock (New Recoil pad may be req’d, NOT included)
Round Off Recoil Pad
Install Replacement Pump Gun Forend (No S/S, fitting extra $)
Install Sling Mounts
Install Side Saddle (New Forend may be req’d, fitting extra $)
Saiga Shotgun Stock/Trigger Guard Conversion (Parts Not Included)

$75-$150
.
$100
$40
$40
$50
$40
$280

Install Pachmayr Decelerator Pad (Synthetic Or Wood, Pad Not Included): $75-$150

Shorten Length Of Pull, Cut Stock (New Recoil pad may be req’d, NOT included): $100

Round Off Recoil Pad: $40

Install Replacement Pump Gun Forend (No S/S, fitting extra $): $40

Install Sling Mounts: $50

Install Side Saddle (New Forend may be req’d, fitting extra $): $40

Saiga Shotgun Stock/Trigger Guard Conversion (Parts Not Included): $280

CERAKOTE PRICING BELOW

CERAKOTE PRICING BELOW

STANDARD PISTOLS
(GLOCK, 1911, XD, etc.)
(Starting At)

  • 1- Color Complete $200.00
  • 2- Color Complete $250.00
  • 3- Color / Beginning Camo Price $350.00
  • Stencil / Custom Job Quote (Starting at) $350.00
  • Disassembly / Reassembly Fee $60.00* (*Charges May Apply)
  • Sig Sauer / Small Autos / Revolvers ADD +$40.00
  • Non-Stocked Colors Surcharge $40.00

SHOTGUNS
(Starting At)

  • 1- Color Complete $250.00
  • 2- Color Complete $275.00
  • 3- Color Camo Price $350.00
  • Stencil / Custom Job Quote (Starting at) $400.00
  • Disassembly / Reassembly Fee $60.00* (*Charges May Apply)
  • Non-Stocked Colors Surcharge $40.00

BOLT ACTION RIFLES
(Starting At)

  • 1- Color Barreled Action $200.00
  • Bolt Color Change $40.00
  • 2- Color Camo Price $275.00
  • Stencil / Custom Job Quote (Starting at) $400.00
  • Disassembly / Reassembly Fee $50.00* (*Charges May Apply)
  • Non-Stocked Colors Surcharge $40.00

STOCKS – ALL But Wood
(Starting At)

  • 1- Color Barreled Action $100.00
  • 2- Color Complete $150.00
  • 2- Color Camo Price $275.00
  • Stencil / Camo /  Custom Job Quote (Starting at) $300.00
  • Disassembly / Reassembly Fee $60.00* (*Charges May Apply)
  • Non-Stocked Colors Surcharge $40.00

COMPLETE BOLT ACTION RIFLES SUBTITLE
(Starting At)

  • 1- Color Complete $300.00
  • 2- Color Complete $350.00
  • 2- Color Camo Price $400.00
  • Stencil / Camo /  Custom Job Quote (Starting at) $500.00
  • Just BBL Action, Bolt, Handle, and Shround $200.00
  • Disassembly / Reassembly Fee $50.00* (*Charges May Apply)
  • Non-Stocked Colors Surcharge $40.00

AR / AK STYLE RIFLES
(Starting At)

  • AK Complete Rifle- 1 COlor: $350.00
  • 1- Color Complete $275.00
  • 2- Color Complete $350.00
  • 3- Color /Beginning Camo Price $375.00
  • Stencil / Custom Job Quote (Starting at) $500.00
  • Disassembly / Reassembly Fee $75.00* (*Charges May Apply)
  • Non-Stocked Colors Surcharge $40.00

ACCESSORIES
(Starting At)

  • Stripped AR Receiver Set $100.00
  • Individual Receivers $60.00
  • Front Handguard $60.00
  • Quad Rail, Keymod Rail, Front HG Rail $85.00
  • AR Rear Stocks (Starting At) $60.00
  • Suppressors (NFA Paperwork Required) $150
  • Non-Stocked Colors Surcharge $40.00
  • Ala’ Carte Items (Depending on Size, Composition, etc.) $80.00*
  • *Possible “Basket Rates” Available on Ala’ Carte Items
  • Disassembly / Reassembly Charges May Apply

SCOPES
(Starting At)

  • Scope 1- color $250.00
  • Scopes (CK’d w/ complete CK rifle job) $200.00
  • Trijicon ACOG Sight $250.00
  • EOTech Hood, Flashlight $50
  • Rifle Mags (Minimum of 4) $20.00 ea.
  • Pistol Mags (Minimum of 5) @20.00 ea.
  • Misc Parts, Magpul AFGs, Grips, (Minimum 2) $25.00
  • Non-Stocked Colors Surcharge $40.00
  • Disassembly / Reassembly Charges May Apply