LRK MECHANICAL

-LRK SERVICES- These are the services we offer here at LRK Mechanical. Pricing is in a "Starting At" Structure. In other words, all prices you see on our list are the Base Price of that particular service. All prices in the list are Non-Negotiable and we do not take any sort of trade for service. We do, however, offer a discount on LABOR for LEO and MILITARY customers. Please see our "LEO & GOVT." page for further details. GENERAL INFO Shop Rate: $100 per Hour (For all Custom Gunsmithing and services not listed) Minimum Charge Per Firearm: $50 (NO Exceptions) TYPICAL COMPLETION TIMES Professional Cleaning Services: 5-10 Business Days Warranty Returns: 4-10 Weeks Sight Installation: 2-5 Business Days General Repairs: 4-6 Weeks (Parts Dependant) CONDITIONS & EXCLUSIONS We reserve the right to refuse any job at any time for any reason We reserve the right to refuse any work we decide would render a firearm unsafe All Class III Firearms ABSOLUTELY MUST have a copy of the proper paperwork included with it We DO NOT work on or clean any Air Pistols or Rifles, Airsoft Pistols or Rifles, Paintball Guns, or any replicas If there is a need for specialized work, we reserve the right to ship the firearm to another manufacturer for work (This may incur additional shipping and handling charges) If warranty work is required, we reserve the right to ship to the manufacturer (Which may incur additional shipping & handling charges) If there is a need for test firing, we ALWAYS use factory-loaded ammo. We DO NOT use handloads or Mil-Surp ammo WE DO NOT REMOVE OR DEACTIVATE SAFETIES FOR ANYONE, EVER GENERAL GUNSMITHING SERVICES(Starting At) SERVICES (Starting At) (Part/Finishing/Ammo Not included) MINIMUM Machine work Fee ________________________________________________________________________ $50 Assemble your AR Upper (parts not included in cost) _____________________________________________________$50 Assemble your AR Lower (parts not included in cost) _____________________________________________________$70 Safety Inspection/Function check (no test fire) _________________________________________________________ $40 Safety Inspection/Function check Class III or .50Cal (no test fire) __________________________________________$70 Safety Inspection/Function check w/ Test Fire (Class III & .50 cal's excluded) ________________________________ $50 Professional Cleaning: Strip, clean, inspect, oil, reassemble ________________________________________________$50 Professional Cleaning: Rusted HEAVILY (Minimum $150 Cost) _______________________________________SHOP RATE Professional Cleaning: Class III, .50 Cals, ARs with Multiple Accessories, rusted guns, dbl-barrel's_______________ $100 Test Fire- Function, No sight in ______________________________________________________________________ $40 Test Fire- Function, Machine Gun ___________________________________________________________________ $60 Test Fire- Function & 25 yd Sight in __________________________________________________________________ $45 Non-Firing BORE Sighting (Collimator ONLY)___________________________________________________________ $40 Remove Stuck Bullet or Case ________________________________________________________________________ $40 Re-Assemble Gun from Parts (If Complete) __________________________________________Minimum/Starting At: $75 Warranty Return to Manufacturer (Not including S&H)___________________________________________________ $45 Full AK Build (Includes Disassem/Reassem, No Cerakote or finish included) ________________________________ $400 Full AK Cerakote Finish (Solid Color) *Pro-rated to $200 if done at time of Build ____________________________ $350 HANDGUN SERVICES(Starting At) TRIGGER TUNE-UPS (Starting At) (Part/Finishing Not included) Glock- Smooth Trigger action only (Does not change trigger pull weight)_____________________________________ $60 Glock- Install new connector (Not including part cost) ____________________________________________________$40 Glock- Install connector w/ over-travel stop(Not including part cost) ________________________________________ $50 Springfield XD- Smooth action only (Does not change takeup, release, over-travel)_____________________________$75 Springfield XD- Install Trigger kit, duty or carry use(parts not included)_____________________________________ $75 Springfield XD- Install Trigger kit, Competition Only (parts not included)____________________________________$125 S&W M&P- Install Trigger kit (parts not included) _______________________________________________________$75 Install Spring kit (Glock, Springfield, 1911, S&W, parts not included) _______________________________________ $40 1911, Sig Sauer, or Browning HP Action/Reliabilty Job __________________________________________________ $125 HK- Install Trigger Spring kit (parts not included) _______________________________________________________$75 HK- Install LEM Trigger (parts not included) ___________________________________________________________ $75 SIGHT INSTALLATION (Starting At) (Part/Finishing Not included) (ALL Prices reflect standard sight work, additional costs may be incurred for "problem sights") Mill Glock for RMR ________________________________________________________________________________$150 Install Factory Sights (Purchased Here)_______________________________________________________________ $50 Install Factory Sights (NOT Purchased Here)___________________________________________________________ $50 Install STAKE ON Front Sight (Non- Tritium)___________________________________________________________ $65 Additional Cost to mill out sight (IF NEEDED)___________________________________________________ SHOP TIME Machine Slide for Front Dovetail Fit __________________________________________________________________ $65 Machine Slide for NOVAK or Heinnie Rear ____________________________________________________________ $125 Machine Slide for BO-MAR Rear Sight _______________________________________________________________ $160 Install Pinned Revolver Front Sight____________________________________________________________________$50 Install Revolver Adjustable Rear Sight Blade (Part Included)_______________________________________________$50 Drill/Tap Sight Base Hole (Per Hole)__________________________________________________________________ $40 PISTOL SAFETIES (Starting At) (Part/Finishing Not included) Install Gunsmith Fit Beavertail Grip, Specify Ed Brown or Wilson Type, safety & frame fitting req'd (refinish incld)_ $125 Install Drop-In Beavertail Grip Safety _________________________________________________________________ $45 Install Standard 1911 Thumb Safety ___________________________________________________________________$50 Install 1911 Ambi-Thumb Safety (No modifications required)______________________________________________ $65 Install 1911 Ambi-Thumb Safety (If modification is required)______________________________________________ $85 Install Browning Extended Ambi-Thumb Safety__________________________________________________________ $65 HAMMERS & TRIGGERS (Starting At) (Part/Finishing Not included) Install 1911 Style Match Trigger (Action Job Not Included) ________________________________________________$50 Hammer "Bob" Service (Remove Hammer Spur, Semi-Autos)_______________________________________________ $50 Install Match Sear (Action Job Not Included) ___________________________________________________________ $50 Install Hammer (Drop-In, Action Job Not Included) ______________________________________________________ $50 BARRELS, BUSHINGS, GUIDE RODS (Starting At) (Part/Finishing Not included) Thread Barrel for Suppressor*(Surcharge for Metric, L.Hand, & Non-Standard TPI)_________________________ $150+ (*Thread Protector Not Included with Barrel Threading) Ruger .22 BBL Package (Cut/Thread, Relocate Front Sight, Bull BBL Only) _________________________________$200+ Cut Barrel, Face, Cut Crown (Sight Install Not Included)_________________________________________________ $100 RE-Crown Barrel __________________________________________________________________________________ $50 Throat Barrel & Polish Feed Ramp ___________________________________________________________________ $75 Install & Chamber Match Grade BBL & Matching Bushing 1911 ____________________________________________$150 Install & Chamber Match Grade BBL (1911 Bull BBL, Glock, Browning) _____________________________________$100 Install Drop-In Barrel (some fit req'd, bushing fit not included) ____________________________________________ $50 Install Solid Match Barrel Bushing ____________________________________________________________________$75 PISTOL SLIDES (Starting At)(parts/finishing costs extra) Add Front Serrations (Match Rear Serrations) _________________________________________________________$150 Lower/Flair Ejection Port (Re-finish not included)_______________________________________________________ $70 Tune Extractor (Re-finish Not Included) ______________________________________________________________$40+ Polish Breech Face (Re-finish Not Included) ____________________________________________________________$40 Fit New Slide to Frame (Barrel Fitting Not Included) ____________________________________________________ $80 PISTOL FRAMES (Starting At)(parts/finishing costs extra) Bevel Mag Well ___________________________________________________________________________________ $75 Install/Blend Smith-Alexander 1911 Mag Well (Re-finish not included) _____________________________________ $100 Install Ejector ____________________________________________________________________________________$50 Install Mag Catch __________________________________________________________________________________$30 Install Slide Stop (with added detent) ________________________________________________________________ $50 Stake Plunger Tube ____________________________________ ___________________________________________ $60 Stake Grip Bushings (Each)_________________________________________________________________________ $30 Drill/Tap Frame For Grip Bushings (Per Hole)(Plus Set-Up Fee)____________________________________________$40 Install Grip Bushings (Standard,Slim, Oversize, EACH) ___________________________________________________$30 Install Mainspring Housing (If Fitting Req'd) ___________________________________________________________$50 REVOLVER WORK (Starting At)(parts/finishing costs extra) Action Job ( Smooth action, tune internal parts, S/A or D/A, Spring Kit Included)_____________________________ $150 Polish Chambers (For Improved Extraction) ___________________________________________________________ $50 Re-Crown Barrel___________________________________________________________________________________$50 Re-Cut Forcing Cone _______________________________________________________________________________ $50 Bob Hammer & Polish (D/A Only Conversion) __________________________________________________________$100 Round, Radius, & Polish Trigger Face______________________ ___________________________________________ $80 Correct Timing (S&W ONLY)________________________________________________________________________$130 Remove End Shake(Cylinder Play) ___________________________________________________________________ $90 Replace S&W Rear Sight Blade (Part Not Included) ______________________________________________________$40 Set Barrel Back 1 Turn, Adjust BBL/Cylinder Gap, Re-Cut Forcing Cone _____________________________________$200 Re-Time Colt D/As (Starting At) _____________________________________________________________________$200 RIFLE SERVICES(Starting At) RIFLE BARRELING WORK (Starting At)(parts/finishing costs extra) Cut and Crown Barrel (Must submit Form-4 beforehand, if its an SBR conversion)____________________________ $100 RE-Crown Barrel __________________________________________________________________________________ $50 Thread Barrel for Suppressor ( Surcharge for Metric, L. Hand, and Non-Standard TPI's )_______________________$150 Thread AK Barrel _________________________________________________________________________________$150 Thread AK Barrel, Move Front Sight, Thread/Pin Brake (See Above)________________________________________$300 Thread Barrel for Muzzle Brake or Suppressor (Standard TPI)____________________________________________ $150 Thread Barrel for Muzzle Brake or Suppressor w/ Custom "Invisible" Thread Protector ________________________ $250 Fit New Barrel To AR15 (Including Removal/Refit of HGs and Gas Block) ___________________________________ $100 Fit New Gas Block to AR15 (w/ Taper Pin Mounts) ______________________________________________________ $100 Permanently Affix Flash Hider (Drill & Pin) ___________________________________________________________ $100 Remove Permanently Affix Flash Hider (Drill & Pin) ____________________________________________________ $100 Remove/ReInstall Flash Hider or Muzzle Brake__________________________________________________________ $40 Cut, Crown, Thread, and Pin Muzzle Device at 16 Inch Overall Length _______________________________________$250 BOLT SERVICES (Starting At)(parts/finishing costs extra) Install SAKO or M16 Extractor in Remington 700 Bolt___________________________________________________ $200 Install Tac Bolt Knob (Rem700 or Win70, Bolt Knob Not Included)_________________________________________ $140 Check Headspace__________________________________________________________________________________ $40 Re-Build AR15 Bolt( Gas Rings and Firing Pin Retainer Not Included )_______________________________________ $50 Fit AR15 Gas Key, Seal Stake Screws __________________________________________________________________ $50 HK SPECIFIC SERVICES (Starting At)(parts/finishing costs extra) Install Tri-Lug or Other Suppressor Adapter (Adapter Not Included) _______________________________________ $200 Install Paddle Mag Catch (Parts/Re-Finish Not Included) ________________________________________________ $200 TRIGGER TUNING (Starting At)(parts/finishing costs extra) Trigger Job/Action Job, most rifles___________________________________________________________________ $140 Trigger Tuning Job, FNAR rifle______________________________________________________________________ $140 Install & Adjust Aftermarket Trigger (Trigger not included)_______________________________________________ $60 STOCK FITTING (Starting At)(parts/finishing costs extra) Complete Bed With Aluminum Pillars, Free-Float Barrel Channel(Most Fiberglass Stocks)______________________$275 Complete Bed W/O Aluminum Pillars, Free-Float Barrel Channel(Most Fiberglass Stocks)______________________ $240 Install Recoil Pad (Synthetic Stock ad Recoil Pad NOT Included) ___________________________________________$75 Install Recoil Pad (Synthetic Stock ad Recoil Pad NOT Included) __________________________________________ $100 Install Sling Swivel Stud (EACH, Parts Not Included) ____________________________________________________ $30 Install AR Stock or Handguard ______________________________________________________________________ $30 Install AR Handguard(If Gas Block Has To Be Removed)__________________________________________________ $60 Install AR Sling Plate ______________________________________________________________________________ $40 SIGHTS (Starting At)(parts/finishing costs extra) Drill & Tap Rec for Sight Bases- 6-48 or 8-40 (4 Holes)________________________________________________$40/hole Drill & Tap Hole (Hardened or Plate Steel, Extra Charge)_____________________________________________ $40/hole Mount and Bore Sight Scope, Laser Boresighted(More if base needs machining)_______________________________ $40 Bore Sight Customer Mounted Optics (Collimator Only) ___________________________________________________$40 Install Picatinney Scope Rail (No Drill/Tap Req'd, If Machining is req'd, costs extra)_______________________ $35-$150 Fit Taper Pins for AR15 A-Frame F.S. on New Barrel _____________________________________________________$150 SHOTGUN SERVICES(Starting At) BARRELING WORK (Starting At)(parts/finishing costs extra) Cut and Crown Barrel (Must have Form-4 if SBS/Class-3 conversion)_______________________________________ $100 Hone/Polish Chamber ______________________________________________________________________________ $40 Hone/Polish Bore__________________________________________________________________________________ $40 ReCrown & Thread Barrel For Pumpgun for Rem Choke(Only, 12G Only)(BBL Thickness Dependant)_____________$180 SIGHT WORK (Starting At)(parts/finishing costs extra) Install Tac Front Sight, Silver Solder, Plain BBL _______________________________________________________ $130 Install Tritium Tac Front Night Sight , Epoxy/Pin Plain BBL________________________________________________$80 Install Ghost Ring Rear Sight, includes Drill/Tap in Rec. (2 Holes) __________________________________________$80 Drill & Tap Rec for Sight Bases- 6-48 or 8-40 (4 Holes)___________________________________________________$120 Drill & Tap Hole (Hardened or Plate Steel, Extra Charge)_____________________________________________ $40/hole Install Picatinney Scope Rail (**No Drill/Tap Req'd, If Machining is req'd, costs extra) _______________________ $40** Install Sight Head, BBL Drill/Tap Included, Part Not Included ______________________________________________$50 Install Sight Head in Existing Hole (Part Not Included) ___________________________________________________$50 ACTION WORK (Starting At) (Part/Finishing Not included) Smooth Action, Rem & Mossberg Only____________________________________________________________ $90- $150 Trigger Tuning (Smooth Only) _______________________________________________________________________ $80 Install Rem 870 Large Safety Button __________________________________________________________________ $40 Convert Safety to Left-Hand Button ___________________________________________________________________ $80 Install Rem 870 Ejector (Parts Not Included) __________________________________________________________ $100 STOCK WORK (Starting At)(parts/finishing costs extra) Install Pachmayr Decelerator Pad (Synthetic Or Wood, Pad Not Included)_______________________________ $75- $150 Shorten Length Of Pull, Cut Stock(New Recoil pad may be req'd, NOT included)_______________________________$100 Round Off Recoil Pad _______________________________________________________________________________$40 Install Replacement Pump Gun Forend (No S/S, fitting extra $)_____________________________________________$40 Install Sling Mounts ________________________________________________________________________________$50 Install Side Saddle (New Forend may be req'd, fitting extra $)______________________________________________$40 Saiga Shotgun Stock/Trigger Guard Conversion (Parts NOT included)_______________________________________$280

CeRaKOTe PrICING 2018

 

STANDARD PISTOLS

(GLOCK, 1911, XD, etc.) (Starting At)

 

  • 1-Color Complete $200.00
  • 2- Color Complete $250.00
  • 3- Color / Beginning Camo Price $350.00
  • Stencil / Custom Job Quote (Starting at) $350.00
  • Disassembly / Reassembly Fee $60.00* (*Charges May Apply)
  • Sig Sauer / Small Autos / Revolvers ADD +$40.00
  • Non-Stocked Colors Surcharge $40.00

 

SHOTGUNS

(Starting At)

 

  • 1-Color Complete $250.00
  • 2- Color Complete $275.00
  • 2- Color Camo Price $350.00
  • Stencil / Custom Job Quote (Starting at) $400.00
  • Disassembly / Reassembly Fee $60.00* (*Charges May Apply)
  • Non-Stocked Colors Surcharge $40.00

 

BOLT ACTION RIFLES

(Starting At)

 

  • 1-Color Barreled Action $200.00
  • Bolt Color Change $40.00
  • 2- Color Camo Price $275.00
  • Stencil / Custom Job Quote (Starting at) $400.00
  • Disassembly / Reassembly Fee $50.00* (*Charges May Apply)
  • Non-Stocked Colors Surcharge $40.00

 

STOCKS - ALL But Wood

(Starting At)

 

  • 1-Color Complete $100.00
  • 2- Color Complete $150.00
  • 2- Color Camo Price $275.00
  • Stencil / Camo / Custom Job Quote (Starting at) $300.00
  • Disassembly / Reassembly Fee $60.00* (*Charges May Apply)
  • Non-Stocked Colors Surcharge $40.00

 

COMPLETE BOLT ACTION RIFLES

(Starting At)

 

  • 1-Color Complete $300.00
  • 2-Color Complete $350.00
  • 2- Color Camo Price $400.00
  • Stencil / Custom Job Quote (Starting at) $500.00
  • Just BBL Action, Bolt, Handle, and Shroud $200.00
  • Disassembly / Reassembly Fee $50.00* (*Charges May Apply)
  • Non-Stocked Colors Surcharge $40.00

 

AR / AK STYLE RIFLES

(Starting At)

 

  • AK Complete Rifle- 1 Color: $350.00
  • 1-Color Complete $275.00
  • 2-Color Complete $325.00
  • 3- Color /Beginning Camo Price $375.00
  • Stencil / Custom Job Quote (Starting at) $500.00
  • Disassembly / Reassembly Fee $75.00* (*Charges May Apply)
  • Non-Stocked Colors Surcharge $40.00

 

ACCESSORIES

(Starting At)

 

  • Stripped AR Receiver Set $100.00
  • Individual Receivers $60.00
  • Front Handguard $60.00
  • Quad Rail, Keymod Rail, Front HG Rail $85.00
  • AR Rear Stocks (Starting at) $60.00
  • Suppressors (NFA Paperwork Required) $150.00
  • Non-Stocked Colors Surcharge $40.00
  • Ala' Carte Items (Depending on Size, Composition, etc. ) $80.00*
  • *Possible "Basket Rates" Available on Ala' Carte Items
  • Disassembly / Reassembly Charges May Apply

 

SCOPES

(Starting At)

 

  • Scope 1-color $250.00
  • Scopes (CK'd w/ complete CK rifle job) $200.00
  • Trijicon ACOG Sight $250.00
  • EOTech Hood, Flashlight $50.00
  • Rifle Mags (Minimum of 4) $20.00 ea.
  • Pistol Mags (Minimum of 5) $20.00 ea.
  • Misc Parts, Magpul AFGs, Grips, (Minimum 2) $25.00
  • Non-Stocked Colors Surcharge $40.00
  • Disassembly / Reassembly Charges May Apply

 

 

 

COPYRIGHT LRK MECHANICAL 2017-2018